CONFIGURATIONS

The Pure Glass Flat Roof Light is available in 4 configurations to meet the unique design and aesthetic needs of each project; Single Pane, Modular Silicone Join, Modular Glass Lintel and Modular Aluminium Beam.

Almost any size of Pure Glass Roof Light can be achieved by combining the optimum specification of roof light design, configuration and glass specification.

GLASS SPECIFICATION

The glass for each Pure Glass Roof Light will be determined during specification, however solar-control, self-cleaning, toughened double-glazed glass is our minimum standard for safety and performance.

Based on the location of the roof light, a laminated inner pane may also be specified.

PERFORMANCE

To achieve optimum thermal efficiency and reduce the risk of condensation, all of our flat roof flights are fitted with warm edge spacer bars and feature argon gas filled cavities between the two panes. The frame is also thermally broken using 32mm twin polyamide inserts to ensure there is no thermal bridge from inside to outside, improving the thermal efficiency of the roof light.

OPENING OPTIONS

To achieve the ultimate versatility for ventilation, temperature control or access from your roof light, the Pure Glass Roof Light can be designed to open by either electric or manual operation.

Electric operation includes a wireless remote with a 230volt motor or rocker switch.

Manual operation, usually chosen for access purposes, includes double lock security latches and a steel strengthened frame.

Based on the specific requirements for the project, this can either be the whole roof light unit opening or an opening section incorporated into a fixed roof light.